In short
TISAX is an information security assessment for the automotive supply chain, governed by the ENX Association against the VDA ISA catalogue.
It is not required by law: customers ask for it from suppliers that handle their information, their prototypes or personal data.
Assessment objectives determine the level: AL2 for high protection needs, AL3 for very high protection needs and prototypes.
ISO 27001 is an excellent foundation, but TISAX has a predefined scope and extra requirements on prototypes, NDAs, visitors and suppliers.
TISAX labels last three years and are shared only through the ENX portal; renewal should start well in advance.
TISAX (Trusted Information Security Assessment Exchange) is the scheme that companies in the automotive supply chain use to show their customers that they properly protect the confidential information, prototypes and personal data they receive. It is not a law and it is not an ISO certification: it is an assessment carried out by an audit provider commissioned by the ENX Association against the VDA ISA catalogue, and it ends with TISAX labels, valid for three years and shared with partners through the ENX portal.
Who needs it? No law requires it: the customer asks for it. If you work for a vehicle manufacturer or a supplier in the automotive supply chain, especially in the German market, and you handle information or prototypes that the customer considers worth protecting, sooner or later you will probably be asked for it as a condition for working together. In this guide you will find what TISAX is, who runs it, how to choose assessment levels and objectives, what you can reuse from ISO 27001, the step-by-step process, the most common mistakes and a checklist to get ready.
What is TISAX and who runs it?
TISAX is a shared framework for information security assessments in the automotive industry. It was created so that every customer does not have to audit every supplier: the supplier is assessed once, with the same criteria for everyone, and then shares the result with whoever asks for it. According to ENX, the scheme aims to create a standardised and scalable approach to information security in the sector.
ENX Association and VDA: who does what
The scheme is governed by the ENX Association, an association under French law that runs the ENX portal, the database of all TISAX participants through which registration and the exchange of results take place. ENX also maintains the requirements catalogue, the Information Security Assessment (ISA), which is published by the VDA, the German Association of the Automotive Industry, as the VDA ISA.
ENX does not carry out the assessments: they are performed by audit providers commissioned by ENX, which apply the same criteria and methods. That is why the result does not depend on which audit provider you choose. The scheme is developed over time by vehicle manufacturers, suppliers and audit providers through working groups and committees.
An assessment and labels, not a certificate
People often talk about "TISAX certification", but the correct term is TISAX assessment. At the end of the process you do not receive a certificate to hang on the wall: you receive a result and, if it is positive, one or more TISAX labels showing which assessment objectives you were assessed for.
There is another important difference: results are not public. By default only the assessed company receives the report and the labels, and it decides which partners to share them with. In the rest of this guide we therefore use "assessment" and "label", but if you search for "TISAX certification" you are talking about the same thing.
Who needs TISAX?
TISAX is for those who work for the automotive supply chain and handle customer information that needs protection. There is no legal obligation: according to the ENX FAQs, some participants have made the assessment a mandatory requirement for many of their suppliers. In practice it is the customer, in the contract or during supplier qualification, who tells you whether you need it and for which objectives.
Supply chain companies, especially in the German market
The scheme was born in the German automotive industry: the ISA catalogue is published by the VDA and results are exchanged through the ENX portal. That is why the request most often reaches companies working, directly or indirectly, for German vehicle manufacturers and large suppliers. But the labels have no geographical borders: assessments take place worldwide and an Italian or Spanish SME can take part like any other company.
The typical case is the second or third-tier supplier that receives the request down the chain: the direct customer has been assessed and, to keep its own label, must show that its suppliers also protect information adequately.
Anyone handling manufacturers' information, prototypes or data
It is not only for component makers. The assessment can be requested from anyone handling the customer's confidential information: design and engineering firms, software developers, test centres, companies that build or transport prototypes, agencies organising events or photo shoots with vehicles not yet unveiled, IT and service providers processing personal data on the customer's behalf.
Active participant and passive participant
In TISAX terms, the company being assessed is the active participant, while the partner that requests the assessment and receives the result is the passive participant. A company can be both: assessed by its customers and, in turn, requesting assessments from its own suppliers.
Assessment levels AL1, AL2 and AL3: what is the difference?
The assessment level (AL) shows how thorough the audit provider's verification is. You do not choose it freely: it depends on the assessment objectives you need, and the assessment is carried out at least at the highest level required by the selected objectives.
Level | What the audit provider checks | Use in TISAX |
|---|---|---|
AL1 | Only that a completed self-assessment exists, without reviewing its content | Not used in TISAX because of its low trust level |
AL2 | Plausibility check of the self-assessment, review of evidence and interview with the person in charge of information security, usually by web conference | Objectives with high protection needs |
AL3 | Thorough verification: documents, planned and unplanned interviews, observation of premises and processes, on-site activities | Objectives with very high protection needs and prototypes |
AL2 and AL3 in practice
With AL2 the audit provider starts from your self-assessment and checks that it is consistent with the evidence, without necessarily visiting your premises. With AL3 the verification goes deeper: the auditor uses the self-assessment and documents to prepare, then checks on site how people actually work, how premises and systems are protected and how restricted areas are managed.
The ENX handbook also provides an option called AL2.5, a fully remote assessment that formally counts as AL2 and can later be upgraded to AL3.
Levels are downward compatible
A result at a higher level also covers the lower one: if you have been assessed at AL3, you also meet the requests of a customer asking for AL2 on the same objective. That is why, before registering, it pays to gather the requirements of all your customers and not just the one who wrote to you first.
Which assessment objectives should you choose?
Assessment objectives define what your company protects and determine the labels you will receive. According to ENX there are currently ten objectives, grouped into three areas: information, prototypes and personal data. Each one requires a specific assessment level.
Objective (ENX name) | What it covers | Level |
|---|---|---|
Confidential | Information with high protection needs for confidentiality | AL2 |
Strictly confidential | Information with very high protection needs for confidentiality | AL3 |
High availability | Information with high protection needs for availability | AL2 |
Very high availability | Information with very high protection needs for availability | AL3 |
Proto parts | Protection of prototype parts and components | AL3 |
Proto vehicles | Protection of prototype vehicles | AL3 |
Test vehicles | Handling of test vehicles | AL2 |
Proto events | Protection of prototypes during events and film or photo shoots | AL2 |
Data | Data protection as a processor (Article 28 GDPR) | AL2 |
Special data | As above, with special categories of data (Article 9 GDPR) | AL3 |
Information with high or very high protection needs
This is the most requested area. Until 31 March 2024 the objectives "Info high" and "Info very high" were selected; from 1 April 2024 they were replaced by Confidential and Strictly confidential, alongside the availability objectives. If a customer still asks you for "Info high", check with them which current objective their request corresponds to.
Prototype protection
The prototype objectives concern those who manufacture, receive or store vehicles, components or parts that the customer has classified as requiring protection, and those who display them at events or shoots. Prototype parts and vehicles require AL3, and therefore a physical check of the premises too. Since 1 January 2025 the Test vehicles and Proto events objectives require AL2 instead of AL3.
Data protection
The Data and Special data objectives apply when you process personal data on behalf of the customer, as a processor under Article 28 GDPR. Special data is added when the data belong to the special categories in Article 9, such as health data. They do not replace GDPR compliance, but they verify it within the relationship with the automotive customer.
What is the VDA ISA catalogue and how does it relate to ISO 27001?
The ISA catalogue is the basis of TISAX: a questionnaire of controls, phrased as questions ("To what extent…?"), against which you assess yourself and are assessed. It is divided into three parts, Information Security, Prototype Protection and Data Protection, and the information security part contains the basic controls based on ISO/IEC 27001. Each control states the objective, the mandatory requirements and the additional ones for high or very high protection needs, plus references to the corresponding ISO/IEC 27001:2022 controls.
Each control is rated on a maturity scale from 0 to 5: in the current version the target level is 3 for all controls. The catalogue is public and free of charge: you can download it from the ENX website and start using it for your self-assessment straight away.
Which catalogue version applies
From 2027 the catalogue is updated every year and is named after the year in which it applies. The VDA published VDA ISA2027 on 1 July 2026, and it applies to TISAX assessments ordered from 1 January 2027; assessments ordered before that follow the previous version, ISA 6. According to the ENX handbook, the audit provider uses the version valid when you order the initial assessment: bear this in mind if you are planning the process around the turn of the year.
What you can reuse if you already have ISO 27001
If you have an information security management system that complies with ISO 27001, you start with an advantage. Many ISA controls ask for the same things: policies and responsibilities, inventory and classification of information, risk management, access control, cryptography, vulnerability management, backup and continuity, incident management, staff training, supplier relationships. You can reuse policies, procedures, records and evidence by mapping them to the catalogue controls.
The scope, however, works differently. In ISO 27001 you define the scope of the management system and the audit follows it. In TISAX the assessment scope is predefined: the ENX handbook recommends the "standard scope", which covers all processes, procedures and resources under the responsibility of the assessed organisation at the listed locations. An ISO 27001 certificate therefore does not replace the TISAX assessment.
What you need on top of ISO 27001
The differences lie mainly in the automotive-specific requirements and the maturity level required. In the ISA2027 version, some examples are:
Prototypes: rules and responsibilities for prototype protection, order-specific requirements, security areas with access control, protection against viewing, intrusion monitoring, segregation between different customers, traceability and disposal or return according to the customer's instructions.
Non-disclosure agreements (NDAs): contractually valid confidentiality obligations with external companies, employees and project members.
Visitors: mandatory registration, escorting, a documented confidentiality commitment before access, rules on phones, cameras and images in protected areas.
Suppliers and subcontractors: for prototypes, the original customer's approval is needed before involving a subcontractor; for very high protection needs the catalogue requires supplier assurance through a TISAX label, an equivalent third-party assessment or a supplier audit.
Incident response tests: for the higher protection levels the catalogue provides for tests and exercises on reporting and handling security events, crisis simulations and tests of continuity plans; for prototypes, incident procedures (theft, burglary, breach of secrecy, transport irregularities) agreed with the customer.
How to obtain the TISAX label: the step-by-step process
The process is the same for everyone and is described by ENX in the TISAX Participant Handbook. There are seven stages.
Registration: you register as a participant on the ENX portal, accept the general terms of participation and pay the registration fee set by ENX.
Scope: you define the assessment scope, i.e. the locations included and the assessment objectives. The handbook recommends the standard scope, which cannot be changed.
Self-assessment: you complete the ISA catalogue for each relevant control, with maturity level, a description of how you implement it and reference documents.
Assessment: you choose one of the audit providers commissioned by ENX, asking for a quote after registering the scope, and undergo the assessment at the required level.
Corrective action plan: if non-conformities emerge, you prepare a plan with actions and timelines; a follow-up assessment then takes place, which must be completed within nine months of the initial assessment.
Labels: with a positive result you receive the TISAX labels for the objectives assessed.
Exchange of results: you share the result with partners through the ENX portal, choosing the sharing level.
Before the assessment: self-assessment and documents
The ENX handbook requires that preparation be based on the ISA catalogue. The self-assessment is not a formality: at AL2 the auditor checks its plausibility, at AL3 they use it to prepare the visit. For each control, describe concretely what you do and state where the evidence is. A useful warning: an audit provider that consults for you can no longer carry out TISAX assessments for you, so whoever prepares you and whoever assesses you must be different parties.
After the assessment: non-conformities and action plan
The audit provider's findings are divided into major and minor non-conformities, observations and room for improvement. The corrective action plan must be approved: the handbook states that implementation periods cannot exceed nine months, and that beyond three months a justification is needed. Without an approved plan, every non-conformity leads to an overall result of major non-conformity.
Exchanging results on the ENX portal
The result is shared only on the ENX portal, not outside the scheme. You can choose who to share it with and at what level of detail: the handbook recommends the level showing assessment-related information and labels. Be careful: once publication or sharing has been granted, it cannot be revoked.
How long do TISAX labels last?
TISAX labels are valid for three years, starting from the end of the assessment process. The validity period may be shorter if something significant changes, for example a relocation or the opening of new locations that the customer expects to be covered.
Temporary labels
If the initial assessment ends with only minor non-conformities and an approved action plan, you can obtain temporary labels. According to ENX they expire nine months after the closing meeting of the initial assessment and cannot be renewed: they remain valid until the non-conformities are resolved through the follow-up assessment. Partners generally accept them on condition that permanent labels follow.
Renewal
Renewal is not automatic: you repeat the process with a new scope registered before contacting the audit provider. The ENX handbook recommends starting renewal at least one year before expiry, so that you are not left without labels just when the customer checks them.
What are the most common mistakes in the TISAX process?
The most frequent mistakes come from a superficial reading of the customer's requests or of the catalogue. These are the ones we see most often.
Choosing the wrong objectives: registering only "Confidential" when the customer also expects prototype protection means repeating the assessment. Always ask for objectives and level in writing.
Thinking ISO 27001 is enough: the certificate helps a lot, but the scope is different and the catalogue adds specific requirements, especially on prototypes, NDAs, visitors and suppliers.
Filling in the self-assessment optimistically: stating level 3 where evidence is missing leads to non-conformities and an action plan that stretches the timeline.
Forgetting locations: the scope covers the listed locations; a location excluded or added later can affect the validity of the labels.
Underestimating the physical side: at AL3 the auditor checks security areas, access, visitors and camera rules, not just documents.
Starting renewal late: with expired labels the customer may suspend work; renewal needs to be planned well in advance.
Checklist: how to prepare for the TISAX assessment
Before registering on the ENX portal, check that you have the basics in place. This checklist sums up the steps to work on.
You have collected in writing from each customer the assessment objectives and level required.
You have identified the locations to include in the scope and the people who will run the project.
You have downloaded the ISA catalogue version that will apply to your assessment.
You have classified the information and prototypes received from customers according to their protection needs.
You have mapped your ISO 27001 policies, procedures and evidence to the ISA controls.
You have valid NDAs with employees, contractors, suppliers and visitors.
You have written rules on visitors, security areas, cameras and images, if you handle prototypes.
You have assessed the suppliers that access customer information and collected their evidence.
You have tested incident handling and the continuity plan and kept the results.
You have completed the self-assessment with concrete descriptions and references to documents.
How Complaion helps you with TISAX and information security
Complaion supports companies on their way to the TISAX assessment with a dedicated Lead Auditor who follows the project from the start. The Lead Auditor guides you through the self-assessment with a gap analysis against the ISA catalogue, helps you choose objectives and scope based on your customers' requests and maps the controls to what you have already done for ISO 27001: policies, procedures, evidence.
Where additional requirements apply, they prepare with you the prototype protection policies and the requirements on NDAs, visitors, suppliers and incident response testing. The Complaion platform collects evidence, manages documents and the deadline schedule, so you reach the assessment with a complete self-assessment and documents in order, and keep an eye on label expiry.
We already work with more than 1,000 clients on information security and compliance. If you do not have ISO 27001 yet, you can start from our complete guide to ISO 27001 and build a system that supports both certification and the TISAX assessment. If a customer has already asked you for labels, contact us: we start from their requirements.
Frequently asked questions about TISAX
Is TISAX a certification?
Not strictly speaking. TISAX is an assessment carried out by an audit provider commissioned by ENX against the VDA ISA catalogue, ending with TISAX labels. People often talk about "TISAX certification", but results are not public and are shared with partners through the ENX portal.
Is TISAX mandatory?
No law requires it. It is a contractual requirement: customers in the automotive supply chain ask for it from suppliers that handle their information, their prototypes or personal data on their behalf.
If I have ISO 27001, do I still need TISAX?
Yes, if the customer asks for it. ISO 27001 is an excellent foundation because the ISA catalogue is based on its controls, but the scope is defined differently and TISAX adds specific requirements, for example on prototypes. Much of the evidence can be reused, though.
What is the difference between AL2 and AL3?
At AL2 the audit provider checks the plausibility of the self-assessment, reviews evidence and interviews the person in charge, usually remotely. At AL3 the verification is thorough and includes on-site activities. The level depends on the assessment objectives selected.
How long is a TISAX label valid?
Labels are valid for three years from the end of the assessment. Temporary labels, available when there are only minor non-conformities, expire nine months after the closing meeting of the initial assessment.
Who carries out the TISAX assessment?
It is carried out by audit providers commissioned by the ENX Association, which apply the same criteria and methods. It is best to request quotes after registering the scope on the ENX portal, and an audit provider that has consulted for you cannot assess you.
Which version of the ISA catalogue applies?
The one valid when you order the initial assessment. VDA ISA2027 applies to assessments ordered from 1 January 2027; from then on the catalogue is updated every year.












